Activated carbon filter laser engraving marking smoke exhauster Ksxh-20b

Active Carbon Filter Laser Engraving & Marking Smoke Extractor KSXH-20BWorking principle1. Integrated design, convenient installation, flexible move, no pipes needed.2. High-power brushless DC motor, long life, low noise, a high air flow.3. It adopts internal three layers filtering (including activated carbon filte

Featured Products

Active Carbon Filter Laser Engraving & Marking Smoke Extractor KSXH-20B

Working principle

1. Integrated design, convenient installation, flexible move, no pipes needed.

2. High-power brushless DC motor, long life, low noise, a high air flow.

3. It adopts internal three layers filtering (including activated carbon filters) to ensure the filter more accurate, get rid of smell stronger, extend the service life of filter materials. Reduce maintenance costs during use.     

4.Built-in way to avoid indoor air filtration cycle air conditioning / heating discharged to outside.   

5.Multi-position design, air flow Adjustable, flexible suction arms adjust freely.    

6.The air purifier has three layers filtering (including activated carbon filter layer) to ensure a higher filtering efficiency, getting rid of smell more powerfully, extending the service life of filter materials and reducing the maintenance cost . It has multi-site design and air flow is adjustable. It has a flexible suction arm that can be adjusted freely and can reach the destination with the operator. It is suitable for iron welding bit; tin stoves, wave soldering as well as reflow oven; and for laser welding,engraving, marking, cutting and so on. It also provides different types of soldering purification system to match. It includes piping systems, various suction arms, the dust capture device of the nozzle. Smoke captured by a variety of nozzle is inhaled into a purifying system through pipe, and enters directly into the room after filtered by an internal purification system or will be discharged outside through the exhaust pipe.

Active Carbon Filter Laser Engraving & Marking Smoke Extractor Ksxh-20b

Apply to the sites

1.  Position of iron welding.

2.  Soldering oven, wave soldering, reflow oven.

3.  Laser welding, engraving, marking, cutting.

Technical parameters     
Noitemparameter
1fan typeKSXH-20B
2treatment of air flow260m3/h
3motor power200w
4power supply220V/50Hz
5filtration area3m²
6number of filter cartridges3pieces
7filter mediumPTFE coating filter material/(highly effective glass fiber)
8filtration efficiency>95%
10compressed air0.5~0.6 MPa
11maximum pressue470Pa
12noise65±5dB(A)
13weight15±2KGS
14dimensions(excluding suction arm)308×308×420mm
  Exhibition
Active Carbon Filter Laser Engraving & Marking Smoke Extractor Ksxh-20b

Company profile
Active Carbon Filter Laser Engraving & Marking Smoke Extractor Ksxh-20b
Active Carbon Filter Laser Engraving & Marking Smoke Extractor Ksxh-20b


 

 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours